PDA

View Full Version : Mystery Picture



florin
07-09-2008, 11:14 AM
I know you all can't wait until SegwayFesT begins, you can barely sleep of it, you are counting down the days, you're polishing your segway, checking the tire pressure, etc. etc. :)

So I thought to further build up the excitement, why not have some fun in the form of a game called mystery picture.

Below you will see a close up of a segway accessory, it's up to you to guess what kind of part it is.

http://glidingdutchman.eu/blog/wp-content/gallery/florin/mystery_picture.jpg

It shouldn't be to hard to guess, but as a small bonus I will give you a hint: A lot of people will be talking about this part on SegwayFesT.

If you think you know what it is, you can collect your prize at my blog by enjoying the photos of MAMS 2008 and the parts I have bought. Enjoy the pictures :D

P.S. If you can't get enough of the MAMS pictures, make sure to check out http://www.meandmysegway.at for an overview of photo albums of the other attendees.

See you all in Indianapolis soon.



DCTenor1
07-09-2008, 11:19 AM
Do you want us to answer here? Because I can't STAND to keep quiet. If I'm wrong I'll be KICKing myself...
florin
07-09-2008, 11:21 AM
Do you want us to answer here? Because I can't STAND to keep quiet. If I'm wrong I'll be KICKing myself...

Ok, I admit it was too easy, just give me a few seconds and I will prepare another one for you.
florin
07-09-2008, 11:25 AM
Hopefully this one is a bit more difficult to guess:

http://glidingdutchman.eu/blog/wp-content/gallery/florin/mystery2.jpg
sholloway
07-09-2008, 12:53 PM
That's half of a threaded bar clamp that you screw a nut on to create an accessory bar?
florin
07-09-2008, 01:05 PM
That's half of a threaded bar clamp that you screw a nut on to create an accessory bar?

You're absolutely right, I'm using it for the bell.

I'm running out of mystery photos, so feel free to see the photos of the parts I bought from Funky Move Customs: http://glidingdutchman.eu/blog/?page_id=10&album=2&gallery=5

I personally really like the custom design plates, which are mounted behind the carrying handles:

http://glidingdutchman.eu/blog/wp-content/gallery/parts/DSC00016.jpg

The logo is engraved by a laser. The real thing looks a lot better then this photo, but I shot this picture at the hotel room without having cleaning materials at hand.

As soon as the weather gets better I will shoot some photos from my I2 with the parts mounted.
Jendrik
07-09-2008, 03:04 PM
Hello Florin,

Thatīs what you meant at Segway-Fest @ Steyr. This looks pretty nice.
The other thing looks like the spring of the Funky-Move segway-stand.

;-)
Jendrik
florin
07-10-2008, 02:20 AM
Hello Florin,

Thatīs what you meant at Segway-Fest @ Steyr. This looks pretty nice.
The other thing looks like the spring of the Funky-Move segway-stand.

;-)
Jendrik

Yep, This are the design plates we have been talking about. We also talked about SegwayFesT Indianapolis, but you didn't want to come :(
Jendrik
07-10-2008, 03:47 AM
;-) Hey, I want to come but I really do not have the time ;-) Take some nice pictures for us and ask the guys from Segway Inc. about the handlebar-bumper.....
florin
07-10-2008, 04:37 AM
;-) Hey, I want to come but I really do not have the time ;-) Take some nice pictures for us and ask the guys from Segway Inc. about the handlebar-bumper.....

Don't worry, I will shoot some nice pictures and videos.

I don't give you much chance with the handlebar-bumper, Segway Inc. will only release info they want to release when they believe the time is right. But don't worry, I will beg for info, perhaps it helps :D